Specialty

HVAC & Energy Systems

Installation, service, troubleshooting and intelligent control of heating, ventilation and cooling.

The background is a map of DNT's six areas and the connections between them. Digital Products is connected to Software & AI. Software & AI is connected to Digital Products, Connected Systems, Automation & CTS and R&D. Connected Systems is connected to Software & AI, Automation & CTS and Hardware & Machines. Automation & CTS is connected to Software & AI, Connected Systems and Hardware & Machines. Hardware & Machines is connected to Connected Systems, Automation & CTS and R&D. R&D is connected to Software & AI and Hardware & Machines. This page belongs to Software & AI, Connected Systems, Automation & CTS and Hardware & Machines.

The problem

When the system does not run as it should - and the fault code says nothing

Not every technical fault can be found by reading a fault code or swapping a component. Recurring stops, unusual systems, older controls and missing documentation call for someone who understands the mechanics, the hydraulics, the electronics and the control together.

At a glance

Overview

Duelund Nordic Tech combines the trade of a plumbing and heating installer and a practical grasp of the plant with advanced electronics, automation and software development.

We offer technical solutions for new and existing HVAC installations - from installation and commissioning to systematic troubleshooting, repair, optimisation and integration.

We work with ordinary systems and with complex installations that call for special insight into how mechanics, hydraulics, electronics and control work together.

Where it fits

HVAC & Energy Systems ties the physical plant to the rest of DNT: the control in Automation & CTS, the components in Hardware & Machines, remote access in Connected Systems and the analysis in Software & AI.

Authorised work

Work that requires an authorisation we do not hold ourselves - on water installations, refrigerant circuits or fixed electrical installations - is done with an authorised partner.

HVAC & Energy Systems

What we build

  1. Installation & Service

    Installation, commissioning and maintenance of heat pumps, heating, ventilation and climate systems.

  2. Advanced Diagnostics

    Systematic troubleshooting of mechanical, hydraulic, electrical and control faults.

  3. Heat Pumps & Thermal Systems

    Heat production, hydraulic circuits, buffer tanks, circulation pumps, valves, sensors and control strategies.

  4. Ventilation & Climate Control

    Air flows, temperature, sensors and the interplay between ventilation, heating and cooling.

  5. Automation & System Integration

    PLC, CTS/BMS and protocols such as Modbus, BACnet and KNX.

  6. Connected Monitoring

    Data collection, remote monitoring, alarms and analysis of how the plant runs.

Diagnostics

Specialised troubleshooting - also when the standard answer is not enough

We also take on complex and unusual tasks: systems where finding the fault takes special insight, extensive analysis or both installation and control expertise. We have hands-on experience with systems from CoopMax, NuLite and Milton, among others, and we work with all makes and system types.

We also work on systems other installers may hold back from - because of complex control, little documentation or a difficult history of faults. What matters is not the make or the age, but a thorough technical assessment of the problem and of how it can be solved.

Systems

Typical system combinations

  1. Heat pump and buffer tank
  2. PLC and controllers
  3. Modbus / BACnet / MQTT
  4. Data collection and alarms
  5. Dashboard and remote access
  6. Operating analysis and fault diagnosis

Illustrative example

Honestly

Is it the right choice?

A good fit when

  • A new system is to be installed and commissioned
  • An existing system must be modernised or optimised
  • A fault keeps coming back, or nobody has found it

Probably not the right choice when

  • A safety function or a maker's requirement would have to be overridden - we never do that

Experience

Engineering grounded in real-world experience

With a background as a trained plumbing and heating installer and experience with heating, ventilation and energy systems, we combine an understanding of the installation with electronics, software and intelligent automation. We understand both the physical processes and the digital systems that monitor and control them.

Technical view

Data from the physical plant is used both to control it and to understand it: to find faults, spot deviations and improve the control. Where it makes technical sense, data analysis and AI support the fault diagnosis.

  • Heat pumps
  • Buffer tanks and hydraulic circuits
  • Ventilation and climate control
  • PLC
  • CTS/BMS
  • Modbus
  • BACnet
  • KNX

Have a technical challenge?

Start a Project